Will the hydraulic multiplier kit work on my machine?

This is a universal valve kit and is designed to be used with all models and makes of tractors. There are three factors that determine if it will work with your machine if you’re still unsure.  

1. Flow through your current rear remotes
   Our Hydrualic Multiplier kits have a max flow of 20 GPM (or 40 GPM with this kit), which will be fine for the vast majority of machines on the market. If your unsure about flow, please visit tractordata.com, find your machine, and look for “pump flow”. If it’s less than 20 GPM our valves will work great.
2. Spacing of your current rear remotes
   Standard spacing center-to-center on your rear remote quick connections should be 2″-2.5″. If your remotes are outside of that range, then you can purchase our Universal Adapter which gives you a range of 1.25″ – 8″. 
3. Type of couplers on your current rear remotes
   The standard couplers that are included in our multiplier kits are the Push/Pull 1/2″ Body Pioneer (Agricultural) Style Couplers. As an alternative we do offer an option for John Deere “Old Style” Couplers if needed. If you’re unsure about quick coupler styles and sizes please view our Quick Coupler FAQ Page. In the HM2 Kit two male couplers are included in the kit which should directly attach to your current rear remotes, and four female couplers are included to then run hoses to your implements. 

If you’ve checked these three points our multiplier kits will work for you.